ISO DELTA AUTOLIV Group – Airbag cover. Water soluble paint

Fully equipped THERMOREACTOR® TUNNEL:

Heating up area and stabilising area with independent control. This combination benefits from ventilated convection energy generated by the thermoreactor.

 

 

 

 

 

 

 

Fully equipped THERMOREACTOR® + RECYCLED AIR:

General ventilation independent from that of the thermoreactors. This air temperature is controlled independently and the inlet air is filtrated for the ideal dust-free conditions required for any particular job.

Chart of mixed tunnel THERMOREACTOR® SUNKISS + HOT AIR

 

 

 

 

Mixed tunnel

Mixed tunnel:

Thermoreactors in the first area.
Recycled hot air with separate burner in the second area.

1) Quick rise of temperature using thermoreactor.

2) Parts kept at the same temperature in the second area to finish the polymerisation process.

 

 

 

Adhesive drying – 6 THERMOREACTORS® RX COIL – Exposure time 6 to15 seconds – Control by infrared pyrometer

Made-to-measure tunnel:

All tunnel configuration are possible : the thermoreactor work the same way no matter what position they are in. This makes any solution possible, depending on needs.

 

 

 

 

 

Modular tunnel :

The movability option. The two thermoreactor walls of the tunnel are mounted on rails allowing them to be brought closer together or moved further apart depending on the size of the workpieces. This movability can be manual, electric or automatic.

 

 

Fixed oven – 40 THERMOREACTORS® – Polymerisation of power paint – 5 minutes

Fixed oven :

Equipped with thermoreactor, with or without recycled air, this oven can be used for drying paint on small or large volume stationary parts after a programmed drying cycle.